Manual Book Ht Alinco Dj 196

DJ-196 496 Instruction manual.zip: 1.071 Kbytes: DJ-196 Schematic.zip: 65 Kbytes: DJ-196 Service manual.zip: 4.338 Kbytes. This is all the manuals for Alinco. The simple operation combined with the most wanted features will make the Alinco DJ-196T a favorite among hams looking for affordable 2 meter operation. This HT is only 2.2 x 4.9 x 1.6 inches (56x124x40 mm).

Manual Book Ht Alinco Dj 196 Digital
Manual Book Ht Alinco Dj 196 Software

DJ-195T/196T 2 Meter HT

Power, Features, Convenience and Fun!

Manual Book Ht Alinco Dj 196 Digital

Manual Book Ht Alinco Dj 196 Software

Alinco has created a new 2 meter HT that sets new standards in features, convenience and easy operation. The DJ-195/196 sports an alphanumeric display for easy memory management. It has an ergonomic design that's 'user friendly' and the 5 watt output battery is standard. You'll be ready to travel the world with CTCSS encode+decode, DCS and European tone bursts, all included at no extra cost. Best of all, the DJ-195/196 retains the proud Alinco tradition of quality construction and excellent value.
Features:

Alphanumeric display
40 memory channels
5 watt output with standard battery
CTCSS encode+decode and DCS
13.8 VDC direct input with battery charge feature
Direct frequency input
S-meter
Autodialer
Cable Cloning
Computer programmable (third party software required)
MARS/CAP capability (DJ-195T/196T)
Additional features, including theft alarm!
Back-lit keypad (DJ-196T Only)

Alphanumeric Display	Label channels in an easy-reading format. Display frequency, alpha label or channel number only.
40 Memory Channels	Plenty of room to store your favorite simplex or repeater frequencies along with alphanumeric label, offset, CTCSS encode/decode or DCS setting.
5 watts output	The standard battery allows the DJ-195/196 to produce up to 5 watts. A power input port Accepts 13.8 VDC and charges the battery, but won't allow destructive overcharge.
CTCSS, DCS, Tone Bursts and DTMF	Be prepared for virtually any selective calling situation or gaining access to repeaters with protected inputs. European Tone Bursts include 1000, 1450, 1750 and 2100 Hz.
Direct Frequency Input	Frequency entry is easy using the well-spaced keypad.
S-Meter	Displays relative signal strength.
Cable Cloning	Share identical settings among multiple DJ-195/196 transceivers. Saves time and ensures uniform operation.
Removal Alarm	The DJ-195/196 can be set to emit a tone when disconnected from an external power source until proper action is taken to silence the alarm.
Experimental Insect Repel Feature	Can the DJ-195/196 actually repel mosquitoes? Activate the special tone and decide for yourself! You may find the DJ-195/196 can 'de-bug' your outdoor operating site!

Specifications

F2,F3,WFM
General
Freq. RX original status	130 to 174 F2 F3 only
Freq. TX	F3 144-147.995
Freq. Stability	+/-5ppm(-10 to +60c)
Antenna Imp.	50 ohm unbalanced
Supply Voltage	DC 13.8V rated DC 6.0min to 16V max
Ground	Negative GND
Current consumption	TX 5W 1.2A approx.
at 13.8V external source	RX 200mA approx/300mW RX squelched 50mA approx. RX Batt.Save on 20mA app.
Operating Temp. range	-10 to +60 degrees C.
Dimention w/o projection	56(W) x 124(H) x 40 (D)
Weight with drycellcase+cell and antenna	N/a
Transmitter
Output power	5W 13.8V or EBP48N Low=0.5W
Modulation	Variable reactance
Max. Deviation	n/a
Spurious emission	less than -60db
Microphone Imp.	2k ohms approx.
Receiver
Circuit	Double superheterodyne
1st IF freq.	21.7Mhz
2nd IF freq.	450khz
Sensitivity 12db SINAD	better than -8dbu (0.2uV or less)
Selectivity except WFM	more than -6db/12khz less than -60db/28khz
Image/spurious response	less than -60db
AF out at 10% distort.13.8V	Max 300mW
AF impedance	8 ohms
Standard feature
Expandible RX range	none
MARS/CAP mod.	Yes
DTMF	tone encode
DCS SQ	enc/dec
CTCSS SQ	Enc/Dec 39tones
Memory ch.	40ch non expandible
Auto Dialer memory	memory 9 memories, max 16 characters/memory
Call channel	Yes

Comments are closed.